Auerswald COMfortel 1400 IP Inbetriebnahmeanleitung Seite 50

Fig. 11: Connection via PoE Injector
A COMfortel 1400 IP
B Network switch
C PoE Injector
If required, insert the PoE Injector into a power socket.
3.
Notes:
In the case you want to configure your telephone without DHCP server, see
chapter Commissioning > Configuring Network Settings Manually.
During the automated configuration from a provisioning server, the tele-
phone requests the address of the provisioning server and the name of the
provisioning file from the DHCP server or the redirect server. Subsequently,
the telephone starts up, displays the start page, and is ready for operation.
If the telephone starts up with the language selection instead and then with
the setup assistant, you can enter the address of the provisioning server
into the telephone. To do this, tap on Specify provisioning server and
subsequently enter the URL.
50
The telephone starts. Meanwhile, the Auerswald company icon and the
Android icon are shown on the display.
If a DHCP server has been configured in the local network, the tele-
phone automatically receives its IP address, subnet mask, as well as
the gateway and DNS server addresses from this DHCP server during
a DHCP request.
The dialogue in which you select the language and the setup assistant
appears (only during the initial start-up of the telephone).
COMfortel 1400 IP - Firmware V2.4 - Setup V05 12/2015