Assembling The Telephone; Wall-Mounting The Telephone - Auerswald COMfortel 1400 IP Inbetriebnahmeanleitung

Warning: Liquid entering the casing can cause life-threatening electric
shocks and damage or destroy the telephone.
Caution: Mechanical stress and electro-magnetic fields can result in dam-
age to or destruction of the device or impairment of its functions.

Assembling the Telephone

Place the telephone on a clean, flat surface.
1.
Caution: Some paints or plastics used on furniture may react chemically
with the plastic feet on the device and cause them to soften. Plastic chem-
ically changed in this way on the feet of the device may cause damage to
the surface of your furniture.

Wall-Mounting the Telephone

Requirements
– Tools and material:
COMfortel 1400 IP - Firmware V2.4 - Setup V05 12/2015
Only operate the telephone in closed, dry rooms.
Avoid mechanical loads (e.g. vibrations).
Avoid the proximity of devices which radiate electro-magnetic fields (for
example, radio sets, professional radio equipment, amateur radio
equipment, mobile phones, DECT systems, WLAN routers, etc.).
Do not expose the device to direct sunlight.
Protect the device from dirt, excessive dust, condensation, caustic
liquids, and steam.
Note the values for ambient temperature given in the technical data.
Place the telephone on a non-slip pad.
Drill and screw driver
Drilling template (see
Two screws (as per DIN 96 or DIN 7996, head diameter 7 mm, not
included in the scope of delivery)
Two dowels (for a 5-mm hole, not included in the scope of delivery)
page 69)
47