Appendix; Requesting The Firmware Version/Serial Number; Performing A Firmware Update From The Micro-Sd/Sdhc Card - Auerswald COMfortel 1400 IP Inbetriebnahmeanleitung

Once you have put your telephone into operation and configured it, check this section on
operation and configuration for additional useful information.

Requesting the Firmware Version/Serial Number

Tap on
1.
Scroll to the desired information.
2.

Performing a Firmware Update from the Micro-SD/SDHC Card

Important: You can download current firmware files from the Internet. (see
www.auerswald.de/service).
The Operation Guide of the telephone describes further alternatives of per-
forming a firmware update.
Requirements
– Firmware file (*.rom) saved on a micro-SD/SDHC card
– Micro-SD/SDHC card inserted into slot
Tap on
1.
Tap on the firmware file (*.rom) displayed under Update from SD card.
2.
Tap on Update.
3.
Tap on:
4.
Further Steps
If the description of the new function is missing after the installation of a
firmware update, you will find current instruction manuals on the Internet
(see www.auerswald.de/service).
60

Appendix

> Settings > About phone.
> Settings > Update & provisioning.
The message Update is installed, please wait... appears while the
firmware file is loaded into the telephone.
Restart later: The firmware will be activated the next time you restart the
telephone ( > Settings > Shutdown/Reboot > Reboot).
Restart now: The telephone restarts immediately and the new firmware
is activated.
COMfortel 1400 IP - Firmware V2.4 - Setup V05 12/2015