Preparation; Connections At The Bottom Side Of The Telephone; Preparing The Telephone For Use As Table Device - Auerswald COMfortel 1400 IP Inbetriebnahmeanleitung

This chapter describes the preparations required before commissioning the device. This
includes adjusting the height and the connection of the receiver and a headset (not included
in the package). Furthermore, this includes the installation of the telephone at a suitable loca-
tion or the wall-mounting.

Connections at the Bottom Side of the Telephone

Fig. 7: Sockets
A Receiver socket
B Headset socket
C MicroSD/SDHC card slot
D Network cable socket (PoE)
E PC socket

Preparing the Telephone for Use as Table Device

Requirements
– Case feet delivered with the telephone
Assemble the case feet in the required position (see
1.
Note: The feet can be assembled in three different positions.
Push the feet inwards as far as they will go.
2.
COMfortel 1400 IP - Firmware V2.4 - Setup V05 12/2015

Preparation

Fig. 8 on page 44).
43