Changing The Exclusive Key - G&D DP1.2-Vision-CAT Bedienungsanleitung

Changing the exclusive key

After pressing the hotkey for the exclusive operation of the extender the input
devices of the concurrent console are disabled. Only after pressing the hotkey again
at the active console the KVM extender can again be operated by both consoles.
The hotkey for the exclusive operation consists of at least one hotkey modifier (see
Changing hotkeys on page 24) and an exclusive key. Both keys can be selected from a
number of available keys. You can change both the hotkey modifier
exclusive key Print .
How to change the exclusive key:
1. Press
Ctrl+Num
2. Select the row
3. Select the row
4. Under Exclusive key
 Backspace key
Backspace
PrtSc  Print key (default)
 Scroll key
Scroll
 Num key
Num
Pause  Pause key
 Insert key
Insert
Delete  Delete key
Home  Home key
 End key
End
PgUp  Page Up key
 Page Down key
PgDn
Space  Space key
5. Press to save your settings.
F2
1. Click on KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click the
General
4. Under
Exclusive mode actionkey
Backspace, PrtSc, Scroll, Num, Pause, Insert, Delete, Home, End, Page Up, Page
Down and Space.
5. Click to save your changes.
OK
(default) to open the on-screen display.
System setup and press
Hotkey and press Enter
press F8 to select on of the following options:
tab.
select one of the following keys:
Enter .
.
on the directory tree.
G&D DP1.2-Vision-CAT · 27
Configuration
Ctrl and the