Proper Use - Auerswald COMfortel 1600 Installationsanleitung

Important Information

Proper Use

Important: Auerswald products are not designed, manufactured, or
intended for use or resale, in environments that require fail-safe perfor-
mance, such as in the operation of life-support systems and/or nuclear facil-
ities. Our products can only be used for these purposes with prior written
permission from Auerswald in each individual case.
Important: Improper use may, for example, cause functional restrictions or
interference, the destruction of the device or, in a worst case scenario, per-
sonal injury.
 If you are still uncertain about how to use the product properly after
 Read the instructions for the device and keep them for future reference.
The devices COMfortel 1600 and 2600 are system telephones.These system
telephones are intended for use in closed, dry rooms. System telephones are
intended exclusively for connecting to an internal S
PBXs from Auerswald:










Important: Connecting to a PBX from another manufacturer or to the exter-
nal S
34
COMfortel 1600/2600 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V06 05/2015
reading the chapter below, please contact your specialised dealer.
COMpact 3000 analogue/ISDN/VoIP (as of firmware version 4.0L)
COMpact 2206 USB (as of firmware version 2.4B)
COMpact 4410 USB (as of firmware version 2.4B)
COMpact 4000
COMpact 5000/R
COMpact 5010 VoIP (as of firmware version 4.2A)
COMpact 5020 VoIP (as of firmware version 4.2A)
COMmander 6000/R/RX (as of firmware version 6.0E)
COMmander Basic.2/19" (as of firmware version 4.2A)
COMmander Business/19" (as of firmware version 4.2A)
connection of a network provider is not intended.
0
or U port of the following
0 P0