Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
V1.00/EN
3.4
Installation into the control panel
h
Insert the device from the front into the panel cut-out and ensure that the front frame seal is correctly positioned.
h
From the panel rear, slide the mounting brackets into the guides on the sides of the case. The flat faces of the mounting
brackets must make contact with the case.
h
Place the mounting brackets against the panel rear, and tighten evenly with a screwdriver.
3 Installation
12
Werbung
Kapitel
Inhaltsverzeichnis
