Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Description
... terminal 5 and 6 of re-
lay output K1 is not
closed, althout LED K1 is
lit green (within the valid
range).
...only LEDs are lit in the
display
V1.00/EN
Cause
-
The integrated fuse cut-out is defective
caused by an excessive relay current.
-
Display shut-down after timeout was activat-
ed
Remedy
h
Measure terminal 5 and 6 of the relay when
the LED K1 is lit green using a continuity
test device.
h
The device must be repaired by JUMO.
v
Chapter 2.1 „Service addresses"
h
Press any key
or
v
Chapter 7.8 „C118 Display shut-down after
timeout"
16 What to do, if ...
57
Werbung
Kapitel
Inhaltsverzeichnis
