C116 Display After Switch-On; C117 Binary Input Function - JUMO safetyM TB 08 Betriebsanleitung

V1.00/EN
7.6

C116 Display after switch-on

Normal display
0 Limit value AL
1 Measured value
2 Pre-alarm
3 Limit value for the difference
4 Difference
5 Measured value 2
7.7

C117 Binary input function

Binary input function
0 no function
1 Unlocking
2 Key inhibit
3 Level inhibit
k
ex-factory
7 Configuration level
Remark
Chapter „Operating overview"
Can only be adjusted when C111 = 24
is set (differential value calculation).
Remark
The binary input has the same function as the "Reset" key (press >3sec)
As a protection against unauthorized device operation.
Configuration and parameter level are enabled.
28