7.11 C 120 Limit value for relay alternations
Limit value for relay alternations
Here, the limit value for admissible relay alternations is set.
If the counter reading for relay alternations (C121) exceeds the limit value, er-
ror message 0001 appears immediately and the relay output K1 drops out.
This function is factory-set to "0" and thus inactive.
7.12 C 121 Counter reading for relay alternations
Counter reading for relay alternations
Here, the alternations for relay output K1 are counted.
If the limit value set below C120 is reached,
error message 0001 appears and relay output K1 drops out.
The counter is factory-set to "0".
If this error is acknowledged by pressing the
again with 0.
V1.00/EN
key >3sec, counting is started
7 Configuration level
Value range
(factory-setting bold)
0 ... 9999
Value range
(factory-setting bold)
0 ... 9999
31