Scl, Sch, Allo, Alhi, Offs, Hys1, Hys2 - JUMO safetyM TB 08 Betriebsanleitung

V1.00/EN

7.10 SCL, SCH, ALLO, ALHI, OFFS, HYS1, HYS2

Lower display value when standard
signals are connected.
Upper display value when standard
signals are connected.
Lower limit of the setting range for
limit value AL
Upper limit of the setting range for
limit value AL
Measured value offset
Hysteresis in respect to the limit
value AL
Hysteresis in respect to the pre-alarm
UA
7 Configuration level
Remark
only appears when C111 is set to 52, 53, 63 or
71 (current, voltage)
This can be used to limit the setting range!
adjustable: max. -1999 ... 9999
The measured value offset can be used to cor-
rect a measured value by a programmable
value.
0 ... 100
0 ... 100 (only if C119 = 1 or C119 = 2)
30
Value range
(ex-factory
setting bold)
-1999 ... 0 ... +9999
-1999 ... 100 ... +9999
-1999 ... +9999
-1999...+9999
-1999 ...0... +9999
0...1... 100
0...1... 100