C111 Analog Inputs - JUMO safetyM TB 08 Betriebsanleitung

V1.00/EN
7.1

C111 Analog inputs

Analog input
001 Pt 100
DIN EN 60751
006 Pt 1000
DIN EN 60751
601 KTY11-6 PTC
003 Pt 100
DIN EN 60751
005 Pt 1000
DIN EN 60751
024 2x Pt 100 DIN
k
ex-factory
Remark
in 3-wire circuit
in 3-wire circuit
Probe in 2-wire circuit
in 2-wire circuit
in 2-wire circuit
for differential value calculation
The device can calculate a differential value of 2 RTD temperature probes Pt 100 in 2-wire
circuit.
The measuring input INP (terminals 22 and 21) detects the first temperature.
The second measuring input IN2 (terminals 21 and 20) detects the second temperature.
H
The "direct" and "inverse" settings do not influence the switch-
ing behavior of relay K1 during differential value calculation.
Setting range for ALD: -1999 ... 9999
7 Configuration level
Setting range for AL:
(can be restricted via
the set-up)
-1999 ... +9999°C
-1999 ... +9999°C
-1999 ... +9999°C
-1999 ... +9999°C
-1999 ... +9999°C
-1999 ... +9999°C
22
Limits for
underrange /
overrange
-205°C/ +855°C
-205°C/ +855°C
-55°C/ +155°C
-205°C/ +855°C
-205°C/ +855°C
-205°C/ +855°C