Configuration Level - JUMO safetyM TB 08 Betriebsanleitung

7

Configuration level

All parameters are freely accessible ex-factory, but can be disabled via the set-up program.
v
Chapter 13.3 „Activation of the access code"
Parameters of the configuration level which are not required are automatically mapped out depending on the device equip-
ment.
Normal Display
V1.00/EN
limit value
P
> 2 Seconds
P
> 2 Seconds
Analog input
Parameter level
P P
1
pre alarm
only present at
C111=24
Alarm limit for
Differential
1
Only available when C119 = 1 or 2
Konfiguration level
7 Configuration level
P
digital filter
last parameter
21