Preparation
Important Information on the Location of the Telephone
Requirements
–
Existing connections in the immediate vicinity of where the telephone is
placed:
Warning: Liquid entering the casing can cause life-threatening electric
shocks and damage or destroy the telephone.
Only operate the telephone in closed, dry rooms.
Attention: Mechanical stress and electro-magnetic fields can result in the
damage or destruction of the device or impairment of its functions.
Avoid mechanical loads (e.g. vibrations).
Avoid the proximity of devices which radiate electro-magnetic fields (for
Do not expose the device to direct sunlight.
Protect the device from dirt, excessive dust, condensation, caustic
Note the values for ambient temperature given in the technical data.
Assembling the Telephone
•
Place the telephone on a clean, flat surface.
Attention: Some paints or plastics used on furniture may react chemically
with the plastic feet on the device and cause them to soften. Plastic chem-
ically changed in this way on the feet of the device may cause damage to
the surface of your furniture.
Place the telephone on a non-slip pad.
52
Output socket on the DSL router or an existing network mains outlet with
PoE support (with PoE support, if available)
For power supply via power plug (if required): 230 V network mains out-
let
example, radio sets, professional radio equipment, amateur radio
equipment, mobile phones, DECT systems, WLAN routers, etc.).
liquids, and steam.
COMfortel 2600 IP/3600 IP - Firmware V2.2 - Setup V03 05/2015