Auerswald COMfortel 2600 IP Inbetriebnahmeanleitung Seite 58

Commissioning
1.
Start the Settings app (
sistant).
2.
Tap on Providers & PBXs.
3.
Tap on New provider/PBX.
4.
Tap on Auerswald.
5.
Tap on Domain and then enter the IP address of the PBX.
Tip: To prevent wrong entries, you can tap on an entry field in the Provider/
PBX settings menu and, thus, fade in the Android keyboard with a delete
button on the display. If you press the back key, the Android keyboard will
be faded out, once more.
6.
Tap on OK.
7.
Tap on Registrar.
8.
Tap on Registrar address and then enter the IP address of the PBX.
9.
Tap on OK.
10.
Press the back key three times to leave the settings for providers.
11.
Tap on Accounts.
12.
Tap on New account.
13.
Tap on Providers & PBXs.
14.
Tap on the recently created provider (e.g. Auerswald 0).
15.
Tap on Username and then enter the internal telephone number previously
configured in the PBX.
16.
Tap on OK.
17.
Tap on Password and then enter the password corresponding to the inter-
nal telephone number.
18.
Tap on OK.
19.
Tap on Numbers.
20.
Tap on New number.
21.
Tap on Numbers and then enter the internal telephone number previously
configured in the PBX.
22.
Tap on OK.
58
The new provider is displayed under Providers & exchange systems
currently configured (e.g. Auerswald 0).
COMfortel 2600 IP/3600 IP - Firmware V2.2 - Setup V03 05/2015
> Settings or Manual setup from the setup as-