Herunterladen Inhalt Inhalt Diese Seite drucken

Important Information; Used Symbols And Signal Words; Safety Information - Auerswald COMpact 4000 Anleitung

Vorschau ausblenden Andere Handbücher für COMpact 4000:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Important Information

This section contains necessary information to operate your equipment safely. Before you
put the telephone into operation, it is absolutely necessary for you to read the safety informa-
tion described here and to make yourself familiar with the intended use of the device as well
as the technical data.

Used Symbols and Signal Words

Warning:
Warns of the risk of personal injury, such as that caused by hazardous elec-
trical voltage.
Caution:
Warns of material damage.
Important:
Indicates possible application errors and conditions which may cause func-
tional limitations, malfunctions during operation, or other problems.
Note:
Marks supplementary notes.

Safety Information

Warning: Improper handling of the device can result in life-threatening
electrical shock and can damage or destroy the PBX.
 Only a qualified electrician may open the casing. If necessary, have an
 Only a qualified electrician may perform installation work within an open
 Read the instructions for the device and keep them for future reference.
Warning: Touching voltage-carrying conductors or telephone connections
may cause a life-threatening electric shock.
 Mount the PBX in the immediate vicinity of an earth wire (potential com-
 The PBX contains hazardous voltages, even outside of the power sup-
COMpact 4000 - Firmware V6.4 - Setup V02 07/2015
authorised dealer commission the device.
casing or service work using the buttons inside the casing. If necessary,
commission an authorised dealer to perform this work.
pensation bar of the house installation or protective earth conductor).
Connect the earth connection of the PBX to the earth wire via a connect-
ing cable with at least 2.5 mm².
ply unit (for instance ringer voltages). Work on active, contact-hazard-
ous parts is only permitted after creating a voltage-free state. Working
close to active parts is only permitted if these parts are voltage-free or
are protected against direct contact.
Important Information
23

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis