Configuring Network Settings Manually - Auerswald COMfortel 2600 IP Inbetriebnahmeanleitung

Commissioning
Tip: To prevent wrong entries, you can tap on an entry field in the Account
setup assistant and, thus, fade in the Android keyboard with a delete but-
ton on the display. If you press the back key, the Android keyboard will be
faded out, once more.
7.
If you have selected the account type Standard VoIP account, select the
country and enter the area code of your PBX and your internal number con-
figured in the PBX.
Note: The country configured for the selected account and the area code,
if entered, are already shown on the display. Tap on one of the fields to
change country or area code.
Tip: By tapping on the buttons to the left on the display, you can go back to
one of the previous configuration steps, if required.
8.
Select whether the account is to be used as default account.
Further Steps
– Configure the telephone according to your requirements. You can carry out
the configuration either via the display on the telephone (see the Operation
Guide of the telephone) or via the integrated configuration manager (rec-
ommended; see
– If necessary, carry out a firmware update in order to extend the telephone
with the newly available functions (see
features is available on the Internet (see www.auerswald.de/service).

Configuring Network Settings Manually

Requirements
– Message Faulty network setup which is shown on the display during com-
missioning
Note: You can also find the manual network settings under
> Ethernet.
1.
Tap on Faulty network setup.
56
The account is being registered.
The date and time as well as the name of the internal subscriber are
displayed. The telephone is now ready for use.
page 62).
The Settings > Network app will be opened.
COMfortel 2600 IP/3600 IP - Firmware V2.2 - Setup V03 05/2015
page 63). Information about new
> Settings