Inserting the Lettering Label
Requirements
–
Lettering label. On
labels that can be cut out and labelled manually. Using the configuration
manager, you can easily create and print your lettering labels (page Apps
> Function keys > Print button).
–
A flat tool (for example, a small flat-head screw driver)
1.
Insert a flat tool (for example a small flat-head screwdriver) into the slot at
the top of the transparent cover and remove the cover in upward direction.
2.
Insert the lettering label.
3.
Reinsert the cover with the mat surface upwards.
Cleaning the Telephone
1.
Clean the casing with a slightly moist cloth or anti-static cloth.
2.
Clean the display only with a soft, dry cloth.
Warning: Liquid entering the casing can cause life-threatening electric
shocks or damage or destroy the telephone.
Only clean the casing of the device with a slightly moist cloth or an anti-
Attention: Cleaning agents may damage the surface.
Do not use caustic or solvent-containing cleaning agents.
Important: Humidity may cause malfunctions of the display.
Clean the display only with a soft, dry cloth.
COMfortel 2600 IP/3600 IP - Firmware V2.2 - Setup V03 05/2015
page 71
static cloth.
of these instructions, you will find lettering
Appendix
65