Technical Data - Auerswald COMfortel 2600 IP Inbetriebnahmeanleitung

Important Information

Technical Data

Power voltage
PoE class
Wall-mounted power
supply plug
Power consumption
System connection
2. Ethernet port
USB interface
Bluetooth
Storage
Headset
Displays
User elements
Receiver
Loudspeakers
Hook switch
40
COMfortel 2600 IP
Supply via Ethernet port via PoE
according to IEEE 802.3af (if the
network does not support PoE,
with PoE Injector available as an
accessory)
0 (no identification) or 2 (identifi-
cation on the typeplate)
-
Min. 2.4 W, max. 4.1 W
COMfortel Xtension300: +0.6 W
10/100Base Tx Ethernet
10/100Base Tx Ethernet
-
-
SD/SDHC card, max. 16 GB (not
in the package)
Separate interface for dynamic headsets, also with DHSG support
18 LEDs, 15 of them polychro-
matic;
4.3-inch TFT colour display,
480 x 272 pixels, background
lighting
COMfortel Xtension300: 30 LEDs, polychromatic
keypad, 12 permanently assigned function keys, colour display with
touch function, 5-way control element, 15 programmable function
keys with touch function keys on the display
COMfortel Xtension300: 30 programmable function keys
Electret microphone, dynamic receiver, hearing aid-compatible
8 Ohm, diameter 54 mm
Magnetic switch contact
COMfortel 2600 IP/3600 IP - Firmware V2.2 - Setup V03 05/2015
COMfortel 3600 IP
Supply via wall-mounted power
supply 230 VAC; +/- 10 %;
50-60 Hz; 170 mA or via
Ethernet port via PoE according
to IEEE 802.3af
0
Type no. FW7577/EU/40, 40 V,
350 mA
Min. 3.1 W, max. 14.7 W
10/100/1000 MBit Ethernet
10/100/1000 MBit Ethernet
2 x USB host (1x preassigned to
Bluetooth dongle)
Bluetooth 2.1 + EDR
4 GB flash eMMC, 1024 MB
DDR3 RAM with 64-Bit support;
2 GB answering machine;
SD/SDHC card, max. 16 GB (not
in the package)
19 LEDs, 16 of which are poly-
chromatic;
5-inch TFT colour display,
800 x 480 pixels, background
lighting