TMD 834
Notes on Safety
The TMD 834 has been designed to operate safely in accordance with current
technical, safety and EU standards. If installed incorrectly or used for an application
which it is not intended, it is possible that application-related dangers may arise, e.g.
temperature product over-range due to incorrect installation or calibration. For this
reason, the instrument must be installed, connected, operated and maintained
according to the instructions in this manual: personnel must be authorised and
suitably qualified. The manual must have been read and understood, and the
instructions followed. Modifications and repairs to the device are permissible only
when they are expressly approved in the manual.
If the device is to be installed in an explosion hazardous area, then the specifications
in the certificate as well as all national and local regulations must be observed. The
instrument can be delivered with the certificates listed in the technical data. The
certificate can be identified from the order code stamped on the nameplate.
• Ensure that all personnel are suitably qualified.
• Observe the specifications in the certificate as well as national and local regulations.
Notes on Safety
Installation,
commissioning,
operation
Explosion
hazardous areas
25