Identification; Unit Identification; Legend Plate; Delivery Contents - Endress+Hauser iTEMP HART TMT162 Bedienungsanleitung

Identification

60
2 Identification
2.1

Unit identification

2.1.1

Legend plate

Fig. 1: Example: Field transmitter legend plate
2.2

Delivery contents

The scope of delivery of the field transmitter is as follows:
• Temperature field transmitter
• Entry blank
• Mulitlanguage Brief Operating Instructions as hard copy
• Operating instructions on CD-ROM
• Additional documentation for devices that are suitable for use in hazardous areas, such as
Safety Instructions (XA...), Control or Installation Drawings (ZD...).
2.3

Certificates and approvals

CE Mark, declaration of conformity
The device is designed to meet state-of-the-art safety requirements, has been tested and left
the factory in a condition in which they are safe to operate. The device complies with the
applicable standards and regulations in accordance with IEC 61010 "Protection Measures for
Electrical Equipment for Measurement, Control, Regulation and Laboratory Procedures" and
with the EMC requirements of IEC 61326. The measuring system described in these
Operating Instructions complies with the statutory requirements of the EC Directives. The
manufacturer confirms successful testing of the device by affixing the CE mark.
UL approval
CSA GP approved
Marine approval
2.4

Registered trademarks

®
• HART
Registered trademarks of HART
• Microsoft ® Windows NT
Registered trademarks of Microsoft Corporation, Redmond, USA
®
• iTEMP and ReadWin 2000
1 Order code and series number of the
device
2 Protection and approvals
3 Power supply and output signal
4 Ambient temperature; for Ex area,
see Ex-certification or Control Drawing
5 Approvals with symbols
®
Communication Foundation, Austin, TX, USA
® , Windows ® 2000 and Windows
TMT162
® XP
Endress+Hauser