Notes On Safety Conventions And Icons; Identification; Device Designation; Nameplate - Endress+Hauser iTEMP TMT125 Bedienungsanleitung

Identification

1.4

Notes on safety conventions and icons

Always refer to the safety instructions in these Operating Instructions labeled with the following
symbols:
#
Warning!
This symbol draws attention to activities or procedures that can lead to injuries to persons, safety
risks or the destruction of the unit if not carried out properly.
"
Caution!
This symbol draws attention to activities or procedures that can lead to defective operation or to
destruction of the unit if not carried out properly.
!
Note!
This symbol draws attention to activities or procedures that have an indirect effect on operation,
or can trigger an unforeseen unit reaction if not carried out properly.
ESD - Electrostatic discharge
Protect the terminals against electrostatic discharge. Failure to comply with this instruction can
result in the destruction of parts of the electronics.
2 Identification
2.1

Device designation

2.1.1 Nameplate

The right device?
Compare and check the details on the nameplate of the DIN rail or field housing device against
the measuring point requirements.
TMT125
Order Code: TMT125-XXXXXXXX
Ser.No.:
0123456789101
TAG No.: 1019876543210
1
Fig. 1: Nameplate of the temperature transmitters (DIN rail device as example)
24
3
DEVICE ID 452B4810CD-...
Made in Germany 2006
PTB 05 ATEX xxxx
87484 Nesselwang
II2 (1G/D)G EEx ia IIC T4
II(1) GD [EEx ia ] IIC
inst. per XA056R/09/a3/XX.XX
FISCO according to IEC TS 60079-27
-40°C< Ta < 70°C
6
5
PTB 05 ATEX xxxxX
II 3G EEx nA II T4
II 3G EEx nL IIC T4
II (3)G [EEx nL] IIC T4
#
Avoid electrostatic charge!
2
TMT125
-
+ H L 4
3
a0006759
Endress+Hauser