Column Spl - Telecom Behnke 5-5501 Anleitung

2.6. Column SPL

For Column SPL 5404A
*
www.behnke-online.de
Instructions for Stainless Steel Vertical Column Installation
Guide the connection cables through
the column base towards the top end of the
Column, prior to screwing the column to the
foundation. Use hex screws and plugs, stud
bolts or stay bolts to fix the Column to the
concrete foundation (see chapter "1. Foundation
sketch" on page 31). We recommend using
screws etc. with a 16 mm diameter and a length
of 160 mm minimum.
Important! Please adhere to the torque
indication for tightening as provided by the
screw manufacturer.
Please note: These parts are not included in the
box.
Connect the SPL intercom station to the

infrastructure on site and install it into the
Column (cf. included manual for the SPL

intercom station). Test the intercom station.
* Where the installation is not level, this may
lead to the column body being warped, which
then may result in problems concerning the
columns' waterproofness.
Assembly Instructions
GB
38