Service - Otto Bock B500-S Bedienungsanleitung

Introduction
should be clearly pointed out, however, that the B500 is
a reliable product far beyond this defined period of time,
provided that it is cared for and maintained appropriately.
If the product is going to be re-used, it must be thoroughly
cleaned and disinfected.
Afterwards, the condition of the product must be exam-
ined by an authorised dealer to check for wear and tear
as well as any damage.
Any worn and damaged components as well as compo-
nents which do not fit or are unsuitable for the new user
must be replaced.
The service manual includes a service plan for each
model, detailed information and a list of the required
tools.
Page 86

1.5 Service

nOTE !
Service and repairs on the power wheelchair
must only be carried out by specialist dealers
with personnel authorised and trained by Otto
Bock. Should any problems arise, please con-
tact your power wheelchair supplier.
Should you have any questions or a problem that cannot
be resolved despite using the instructions for use, please
contact Otto Bock Customer Service (see inside cover
for address).
Otto Bock endeavours to support customers in all
respects in order to keep them satisfied with their prod-
uct for a long time.
03/2010 B500 | B500-S