Control; Control Panel; Fig. 13 Control Panel - Otto Bock B500-S Bedienungsanleitung

Operation

7.3 control

ATTEnTIOn !
Risk of impairing the driving performance of
the power wheelchair!
The driving characteristics of the power
wheelchair can be influenced by electromag-
netic fields (mobile phones or other radiating
devices). For this reason, all mobile devices
are to be switched off when driving.
ATTEnTIOn !
Risk of damage to other devices!
The power wheelchair can generate electro-
magnetic fields that can cause interference
with other devices. Therefore, switch off the
controls whenever you do not need them.
7.3.1 control Panel
The control panel is used to control the power wheelchair.
The control panel consists of a button section, LCD dis-
play and joystick. The charging/programming receptacle
is on the underside.
The control panel is used to switch the power wheelchair
on and off, to enter driving commands and to display the
current state of certain functions and components.
Page 110
fig. 13 control panel
1 Joystick
2 Direction indicator, left
3 Warning flasher
4 LCD display
5 On/Off button
03/2010
6 Mode button
7 Horn
8 Direction indicator, right
9 Light
10 Charging receptacle
(underside)
B500 | B500-S