Checklist Before Each Use; Checking The Engine Oil Level - Zipper Zi-Rpe60C Betriebsanleitung

15.3

Checklist before each use

The use of paint thinners, petrol, aggressive chemicals or abrasives leads to material
damage to the surfaces! Therefore use only mild detergents for cleaning!
 Clean the machine and remove dirt and dust if necessary.

If the air filter is dirty, blow the filter cartridge from the inside by moving a jet of dry com-
pressed air up and down. Continue until all dust has been removed. Replace the air filter with
a new one if necessary.
 Check the carburettor for external dirt and dust and clean it with dry compressed air if nec-
essary.

Check the nuts and bolts for tightness. (Screws or bolts loosened by vibrations can lead to
accidents!)
15.3.1

Checking the engine oil level

Too low an oil level will damage the engine and shorten the life of the machine. There-
fore, check the engine oil level before every start and top up the engine oil if necessary.
symbol image
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
3. Take the throttle cable which is rolled up on the en-
gine and fix the throttle clamp on the handle.
4. Make sure that the upper throttle lever is set to mini-
mum ("turtle" symbol).
5. Finally, secure the throttle cable to the retaining
bracket with two cable ties.
6. If necessary, attach the rubber mat to the bottom of
the machine using the metal strips and screws sup-
plied.
N O T E
N O T E
1. To check the engine oil level, place the machine on a safe,
level surface. Switch off the engine and allow the ma-
chine to stand for ten minutes so that the circulating oil
can collect in the oil pan.
2. Unscrew the oil dipstick and wipe with a clean, lint-free
cloth or a non-fibrous paper towel.
3. Push the dipstick into the opening, but do not screw it in.
(Make sure that the dipstick has really been pushed in
completely).
ASSEMBLY
34
ZI-RPE60C | ZI-RPE90C