Hazard Warnings; Assembly; Check Scope Of Delivery - Zipper Zi-Rpe60C Betriebsanleitung


Close the filler cap after refuelling.

Check the fuel line and tank regularly for leaks and cracks. Do not operate the machine if
leaks in the fuel system are known.

Store fuel only in designated and approved containers.

14.6 Hazard warnings

Despite intended use, certain residual risks remain. Due to the design and construction of the ma-
chine, hazardous situations may occur which are identified as follows in these operating instructions:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
A safety instruction designed in this way indicates a possibly hazardous situation which,
if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical suita-
bility/training are and remain the most important safety factor in the error-free operation of the ma-
chine. Safe working depends first and foremost on you!
15

ASSEMBLY

15.1

Check scope of delivery

After delivery, check the machine immediately for transport damage and missing Parts.
15.2 Assembly
The machine is delivered pre-assembled. The parts that have been dismantled for transport must
be assembled before commissioning / use.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
D A N G E R
W A R N I N G
C A U T I O N
N O T E
1. Connect the two parts of the retaining bracket
2. Install the transport device using the threaded rod.
ASSEMBLY
33
ZI-RPE60C | ZI-RPE90C