Slow Cooking - Tefcold Blc3Ax1 Benutzerhandbuch

EVCO S.p.A.
Alternatively, the cycle end date can be postponed using the
8.10

Slow cooking

Pressing this area enables selection of a slow cooking cycle, which can consist of two phases. This function can only be
enabled if an expansion has been set (see parameter E12).
After selection of the slow cooking function, a screen will appear on which it is possible to view and modify the relevant
set points and to decide whether to set up a temperature or time controlled process. It is not possible to modify the set
points while the cycle is in progress.
The slow cooking pre-settings use the following parameters:
rH10 cabinet set point
rH11 product temperature set point
rH12 cycle duration
rU9 % humidity
Vcolor 869/879 | Installer manual ver. 4.0 | Code 144VC869E404
quick key.
page 51 of 96