Multi-Timer Mode - Tefcold Blc3Ax1 Benutzerhandbuch

EVCO S.p.A. Vcolor 869/879 | Installer manual ver. 4.0 | Code 144VC869E404
7.3.2

Multi-timer mode

The time controlled cycle makes it possible to set up to four timers.
The cycle starts up activating only the first timer with its pre-set values. The other timers and their pre-set values can
be enabled by pressing the pencil icon and setting a time once the cycle is underway.
When the time period is set and the timer setting confirmed, the timer count starts up immediately. Each timer operates
independently and on completion of the period it can be reset, starting the timer count up again.
The cycle only terminates when all the set timers have elapsed. When the timer count is complete the buzzer sounds
and the display shows in green the value "0 min" for the relevant timer.
page 31 of 96