Customized Cycle - Tefcold Blc3Ax1 Benutzerhandbuch

EVCO S.p.A. Vcolor 869/879 | Installer manual ver. 4.0 | Code 144VC869E404

7.4 Customized cycle

The customized mode makes it possible to set up a cycle consisting of a maximum of 4 phases (3 blast chilling and 1
conservation) and these can be temperature or time controlled or a mixture of both.
The customized cycle starts up and activates the first phase, which by default is a needle probe phase. It is possible to
change the probe phase to a time controlled phase and to set the relative set points.
To add any more phases press area , while to eliminate any phase previously set in the program, press area . It
is possible to move between the various phases using the arrows at the top of the screen.
Once the desired phases have been selected and set up, press area to confirm that the settings are complete and
a summary screen will be displayed.
Press area to start up the cycle or area to save it in the recipe book.
page 32 of 96