Tefcold BLC3AX1 Benutzerhandbuch Seite 205

EVCO S.p.A.
Once loading is complete, the device will display the mode it was in before being powered down:
- On/Stand-by screen, press the central area to move to the Home screen;
- directly the Home screen. Based on how the machine is configured through parameter "E13", the Home
screen will display either the menu of the BLAST CHILLER mode or the menu of the MULTIFUNCTION mode.
Blast chiller mode home screen
If the power supply has been cut off long enough to cause a clock error (RTC code), it will be necessary to reset
the date and time. The date and time can be set from the settings screen, service section (paragraph 12.1).
Vcolor 869/879 | Installer manual ver. 4.0 | Code 144VC869E404
Multifunction mode home screen
Page 1
page 22 of 96
Page 2