Spengler CARDIOMATE 3 Benutzerhandbuch Seite 77

Item Sub-project name
Acc.
ID
generated Time
by
User input
Auto
Upload
Manual
FTP
Upload
protocol Shard Directory
DICOM
File format FDA-XML/ EM-XML/ SCP/ BKG/ DICOM
picture
Don't save/ PDF/JPG/ BMP
type
Picture
direction
Picture
ECG Grid
Picture
Grid color
Patient
query
protocol
Data
mode
Press button 【F5】 "More" to enter the second page of Admin Configuration. The second page
and functions are as follows:
Confirm
Cancel
Change P
Sys check
More F5
horizontal
Vertical
off
Dot
Line
gray
blue
red
WORKLIST
HL7
ECG mode
Demo
Calibration
Save the settings and exit the Admin Configuration
Cancel the settings and exit the Admin Configuration
Change Admin Configuration password
Enter the system diagnosis to self-check the hardware of the ECG, see 5.10 for details
Function button for switching to the next page of the Admin Configuration
ID accumulated from 1 and not editable
ID generated automatically according to the check time. The
ID length is 12 digits and it is not editable
ID input by user
File will be upload automatically
The user selects the file to be uploaded and clicks the upload
button to complete the upload
To upload through FTP protocol, ECG and FTP server must
be in the same LAN
To upload through the shared directory protocol, the ECG
and the computer of shared directory must be in the same
LAN
To upload through DICOM protocol
Generate horizontal reports
Generate vertical reports
Generate report without ECG grid
The ECG report generated has ECG grid formed by dot
The ECG report generated has ECG grid formed by lines
The color of grid is gray / blue / red
Access to the Worklist server to check the patient protocol
Access to the HL7 server to check the patient protocol
Real time ECG waveform is displayed in the interface
DEMO ECG waveform is displayed in the interface (heart rate
of 80 bpm), and the word "demo" is displayed on the screen.
In this mode, real-time signals cannot be obtained.
Calibration waveform is displayed in the interface (1mv
square wave). In this mode, real-time signals can not be ob-
tained.
77
www.spengler.fr
Description