Spengler CARDIOMATE 3 Benutzerhandbuch Seite 68

4.2.3 Querying Patient Information through Worklist
When the patient information query protocol is set to Worklist, select "Worklist [F5]" to enter
the Worklist interface as shown below:
1/87 : It means that the current first piece of patient information is selected, and a total of
87 pieces of information are queried. The blue background indicates the currently selected
information.
Confirm F1 : Select the current information to enter the patient information
Cancel F2 : Cancel the query results and enter patient information manually
Update F3 : Enter the update range setting interface of Worklist, as shown below
Auto : Automatically query the server to obtain the patient's information list according to
the set conditions;
Date mode
Manual : The patient information list is only obtained when the [Confirm] button is
pressed in the update interface.
Today : Query today's patient information
Update Tomorrow : Query tomorrow's patient information
date Yesterday : Query yesterday's patient information
Date range : Query the patient information of the set date range
Query the server information according to the selected update time range, and return to
Confirm F1
check the query results when the server is set correctly.
Cancel F2 Cancel query and return. No results
68
www.spengler.fr