Spengler CARDIOMATE 3 Benutzerhandbuch Seite 76

5.4 Information Setup
In the Setup interface, press button【4】to enter the Information setup, as shown below:
In the Information setup, the hospital name and device name can be set. The set hospital name
will be displayed on the printed report.
5.5 Admin Configuration
In the Setup interface, press button 【5】on the keyboard and then the password input prompt
box will pop out. Input the password (default password 123456) and then press 【F1】to enter
the admin configurations, as shown below:
76
www.spengler.fr