Message Frame; Ecotwin Monitor Controls And Indicators - Medical Econet Ecotwin Lcd Bedienungsanleitung

ECOtwin LCD / LED

Message Frame

This frame shows the error and current operation status. The error message will be displayed when
the monitor is unable to operate properly. If this error message shows, discontinue use of monitor.
DOOR OPEN

ECOTWIN Monitor Controls and Indicators

There are seven buttons located on the front panel. The buttons are activated by pushed with the
finger until an audible click is heard.
CAUTION
Never use sharp or pointed objects to operate the front-panel switches.

The operation of the buttons is summarized below.
Symbol
User manual
Message
DOP1 OPEN
DOP2 OPEN
Print door is opened while ECOTWIN is
Paper is not loaded while ECOTWIN is
No PAPER
LOW BAT
Name
Power On/Off Button
Dop1 Volume
Up/Down Button
Dop2 Volume
Up/Down Button
Alarm On/Off Button
UC Reference Button
Mode Button
Record On/Off Button
Description
DOP1 is not connected
while ECOTWIN is monitoring
DOP2 is not connected
while ECOTWIN is monitoring
printing
printing
Battery's charging level is low
while ECOTWIN is monitoring
Turns power on or off.
Decreases or increases Dop1 fetal audio volume in
monitoring mode.
Decreases or increases Dop2 fetal audio volume in
monitoring mode.
Makes the alarm sound enable or disable in monitoring
mode.
Resets the UC baseline in monitoring mode.
Puts the monitor into trend scroll mode. The trend frames
shows historical patient data and the
provides navigation capability.
Turns the record on or off.
Description
control knob
21