Ctg(Cardiotocography) Analysis Function; Ctg Analysis Method - Medical Econet Ecotwin Lcd Bedienungsanleitung

ECOtwin LCD / LED

CTG(Cardiotocography) Analysis Function

CTG Analysis Method

At self test, press the control knob, then, paper selection menu appears. After selecting the paper and
demo mode of next step, selection screen of the CTG analysis appears. Select the ON / OFF by
rotating the control knob.
After selecting ON the CTG analysis function, when you press the print button in monitoring mode,
printing is started and CTG analysis is going on at the same time. At this time, <Monitoring Mode>
will be changed to <CTG Mode>, the baseline value is displayed on the FHR frame shown as below.
When you press the print button again, printing is completed and CTG analysis is also ended,
analysis result screen is displayed. After the end of printing, CTG analysis results are printed in
addition, the message "Printing..." is displayed in the warning frame. During printing, Key operation
is disabled.
User manual
Fig. 4.10 CTG Analysis Function
Fig. 4.11 CTG Mode
31