System Startup; Power On; Factory Setting - Medical Econet Ecotwin Lcd Bedienungsanleitung

ECOtwin LCD / LED
Section 5

System Startup

Power on

To operate ECOTWIN LED, please push Power On/Off button slightly. According to the probe
connection, ECOTWIN LED displays FHR and UC.

Factory Setting

The monitor has a function to return the setting values to the default value. ECOTWIN LED enters
<Factory Mode> when the monitor is powered on, while control knob is pressed. Factory setting
reset configuration settings to the default value.
Fetal Heart rate Upper Alarm Limit
Fetal Heart rate Lower Alarm Limit
User manual
Configuration parameter
Dop2 Offset
FM Graph
Record Paper Speed
Auto Printing
Paper
CCV On/Off
CMS Comm. Channel
IP
Subnet Mask
Gateway
Fig. 5.1 Factory Mode
Factory Default
190 BPM
110 BPM
0 BPM
OFF
3 cm/min
0 MIN
FS151-90-80R-01
OFF
SERIAL
192.168.0.3
255.255.255.0
192.168.0.1
33