Stihl iMOW 3.0 Gebrauchsanleitung Seite 68

English
3
► Route the perimeter wire (1) 32 cm (length:
®
1x iMOW Ruler) away from the base plate (3)
toward the side.
► Route the perimeter wire (1) in parallel to the
base plate (3) toward the edge of the mowing
area and maintain a distance from the wall of
32 cm (length: 1x iMOW
► Route the perimeter wire (1) clockwise around
the mowing area,
If the docking station is in an adjacent, navigable
area:
1
3
► Route the perimeter wire (1) 32 cm (length:
®
1x iMOW Ruler) away from the base plate (3)
toward the side.
► Route the perimeter wire (1) in parallel to the
base plate (3) toward the edge of the mowing
area.
► Route the perimeter wire (1) clockwise around
the mowing area,
If the docking station is partly positioned in a bed
and partly in the mowing area:
► Route the perimeter wire (1) away from the
base plate (3) toward the side and maintain a
distance of 32 cm (length: 1x iMOW
parallel to the bed.
68
1
®
Ruler).
8.
8.
1
3
®
Ruler) in
7 Positioning the docking station
► Route the perimeter wire (1) clockwise around
the mowing area,
If the docking station has been positioned partly
in a navigable area and partly in the mowing
area:
► Route the perimeter wire (1) away from the
base plate (3) toward the side and along the
navigable area.
► Route the perimeter wire (1) clockwise around
the mowing area,
7.5 Setting up the docking station
outside the mowing area
1
2
► Install the perimeter wire (1) in the base plate
so that the guide wire lies flat in the cable duct
and is secured by the hook (2).
3
► Guide the perimeter wire (1) for a length of
b = 2.0 cm from the base plate (3) and attach
it with a fixing pin (4).
8.
1
3
8.
4
b
1
0458-074-9601-A