Scope Of Supply - Rotoclear C Basic Bedienungsanleitung

ROTOCLEAR C BASIC

Scope of supply

The camera head is pre-configured to a defined
focus position. Focus positions for close ranges
and/or spindles with a focus range of 200-500
mm (F1) are available, as well as for far ranges from
500-6,000 mm (F2).
The Rotoclear C Basic product is supplied in a
shock protected, environmentally friendly pack-
aging.
Upon receipt of the delivery, check that the con-
tents are complete and undamaged. The delivery
contains different parts depending on the type of
mounting and equipment.
Only store the product in its original packag-
ing in a dry place and protected from the weather.
Only use the original packaging for return
transportation and dismantle the rotor to protect
it during transportation.
Pay attention to the chapter "Troubleshooting".
Rotoclear C Basic
• Camera head
Option: F1; F2
• HDMI unit
• Data cable
Option: 10 m; 20 m
• Sealing air tube
• Plug connector for sealing air
• Top-hat rail clip
• PCB plug connector
• Power cable
• Covering cap
• Suction cup
• Operating Manual
45
1 ×
1 ×
1 ×
1 ×
1 ×
1 ×
1 ×
1 ×
1 ×
1 ×
1 ×