Data Protection Notice - Rotoclear C Basic Bedienungsanleitung

OPERATING MANUAL
entering the machine interior.
Do not install sealing rings in the chamfers of the
rotor outer ring of the camera head rotor. This is
part of the sealing labyrinth and must be able to
rotate freely after assembly.
Liquids such as cooling lubricants or oils must not
run directly onto the sealing labyrinth when the
camera system is switched off.
To mount the camera head on the flex arm mount,
the plug-in connection for the sealing air must be
removed. The sealing air is applied to the system
at the cable gland.
The product is not suitable for operation in poten-
tially explosive atmospheres.
Read the operating instructions before commis-
sioning and using the system.

Data protection notice

The stream from Rotoclear C Basic is usually
displayed on a monitor. This means that it may be
possible to view the recording area. This may
mean that staff or service providers could be ob-
served, i.e. during maintenance work.
Depending on the laws of the country in which the
camera system is being operated, this may touch
on aspects related to data protection.
Before putting Rotoclear C Basic into opera-
tion, please verify whether any corresponding
measures related to data protection need to be
taken.
Optimizations by the manufacturer
The product is subject to a continuous optimiza-
tion process. At the manufacturer's discretion,
changes can be made to geometry, connections
and interfaces that do not change the basic con-
cept of the product. The manufacturer is not
obliged to actively inform about non-functional
adjustments to the product.
42