Rotoclear C Basic Bedienungsanleitung Seite 42

ROTOCLEAR C BASIC
Introduction
Safety information
Before installing and operating the equip-
ment, carefully read the user manuals for Roto-
clear C Basic, and the machine tool with its safety
functions. These contain information about the
design and safe use of the camera system. The
manufacturer is not liable for problems caused by
failure to comply with this user manual. Pay partic-
ular attention to note symbols.
Liability disclaimer
The manufacturer is not liable for losses such as
fire, earthquake, third party interference, or other
accidents, nor for losses related to intentional or
unintentional misuse, improper use, or use under
non-compliant conditions. Rotoclear GmbH will
bill any resulting damage.
The manufacturer is not liable for any losses
caused by use or failure to use this product, such
as loss of business income.
The manufacturer is not liable for consequences
related to improper use.
Important information
This product is designed exclusively for the use of
a camera head in combination with a HDMI unit.
Any other use is at your own risk.
Rotoclear, Rotoclear C Basic and "Insights in Sight"
are registered trademarks of Rotoclear GmbH in
Germany and other countries.
The type plate is an integral element of the
equipment. Any modification of the equipment
and/or modification of the type plate or opening
the housings voids the conformity and warranty.
Intended use
The intended use of Rotoclear C Basic includes
applications in machine tools and similar environ-
ments, where media such as cooling lubricants,
oils, water, rinsing and cleaning fluids are em-
ployed. When a camera is used in such an environ-
ment, the view is obscured or covered due to the
existing media spraying onto the lens or protective
window. That is why Rotoclear C Basic is equipped
with a spinning window in order to ensure a clear
view through the window.
Particles or liquids that land on it are continuous-
ly flung off. This requires that the camera head is
in continuous operation, the sealing air is pres-
ent and the rotor disc rotates constantly for the
self-cleaning effect while the machine is switched
on. The stream of cooling lubricant must not be
aimed directly or targeted at the spinning window
of the camera head.
Improper use
Avoid a misuse of Rotoclear C Basic by using it
only in the intended environments.
Fasten all components so that they are secured
against falling down. Use the flex arm mount (mag-
netic mounting) only temporarily to determine the
installation position.
Avoid collisions with elements in the vicinity of
the camera head, especially when moving the
machine axes or performing work that requires
41