Preparing The Lawn Mower For Operation; Charging The Battery - Stihl Rma 7.0 Rv Gebrauchsanleitung

English
► Wait until the blade has cooled down.
► Wear protective gloves.
■ The blade on the lawn mower is movable even
when the engine is switched off. During main‐
tenance of the blade, the user may be injured
by the moving blade.
► Work carefully.
► Wear protective gloves.
■ The blade on the lawn mower is movable. Dur‐
ing blade maintenance, the user may trap their
fingers between the moving blade and fixed
parts of the lawn mower.
► Work carefully.
► Wear protective gloves.
5 Preparing the Lawn Mower
for Operation
5.1 Preparing the Lawn Mower for
Operation
The following steps must be performed before
commencing work:
► Remove packaging material and transport
locks.
► Make sure that the following components are
in safe condition:
– Lawn mower,
– Blade, 4.6.2.
– Batteries 4.6.3.
► Check batteries,
► Fully charge batteries,
► Clean the lawn mower,
► check the blades,
► Attach the handlebar,
► Fold up the handlebar,
► Adjust the handlebar,
► If the mulched grass is to be directed to the
side and onto the ground:
► Attach the extension,
► Set the cutting height,
► check the controls,
► Insert batteries,
► If the steps cannot be performed: do not use
the lawn mower and consult a STIHL special‐
ist dealer.
5.2 Connecting the lawn mower
through a Bluetooth
interface to the STIHL connec‐
ted app.
► Activate the Bluetooth
the mobile device.
► Activate the Bluetooth® wireless interface on
the control unit .
42
4.6.1.
12.3.
6.1.
17.1.
12.2.
8.1.
9.1.
9.3.
8.2.1.
13.2.
12.1.
10.1
wireless
®
®
wireless interface on

5 Preparing the Lawn Mower for Operation

► Download the STIHL connected app from the
App Store to your mobile device and create an
account.
► Open the STIHL connected app and log in.
► Add a lawn mower to the STIHL connected
app and follow the instructions on the screen.
Contact options and further information can be
found at https://support.stihl.com Or can be
found in the STIHL connected app.
The STIHL connected app is available depend‐
ing on the market.
5.3 Connecting a battery with Blue‐
tooth radio interface with the
®
STIHL connected app
► Activate the Bluetooth
mobile device.
► Activating the Bluetooth
the battery, 7.
► Download the STIHL connected app to the
mobile device from the App Store and create
an account.
► Open and sign in to the STIHL connected app.
► Add the battery in the STIHL connected app
and follow the instructions on the screen.
For contacts and other information, please visit
https://support.stihl.com or see the STIHL con‐
nected app.
The STIHL connected app is available interna‐
tionally.
6 Charging batteries and
LED lights
6.1

Charging the battery

The charging time depends on various factors,
e.g. the battery temperature or the ambient tem‐
perature. For optimal performance, observe the
recommended temperature ranges,
actual charging time may vary from the charging
time indicated. The charging time is indicated at
www.stihl.com/charging-times.
► Recharge the battery as described in the User
Manual for the STIHL AL 101, 301, 301-4,
500, 501 chargers.
®
radio interface on the
®
radio interface on
21.5. The
0478-131-9676-A