Kyosho MINI-Z Buggy MB-010 Serie Bedienungsanleitung Seite 40

TROUBLE
Problem /
Doesn't Run Straight
Doesn't Stop
Running Too Slowly
Other
* If the problem does not improve even after doing the above, we recommend resetting the transmitter.
If using KT-18, refer to the page 31 of the manual for reset.
Referto this website to download the Technical Guide, Option Parts List and other Mini-Z Buggy support resources.
Verwenden Sie diese Webseite
der Tuningteilliste
Se rendre sur le site suivant pour télécharger le Guide Technique, la liste des piéces et options ainsi
que d'autres supports pour Ie Mini-Z Buggy.
Consulteesta påginaweb paradescargarIa Guia Técnica,Lista de PiezasOpcionale informaciönsobre eI BuggyMini-Z.
Mini-Z Buggy Support
Web support
http://www.kyosho.com/mini-z-buggy-support/
SHOOTING
Cause/
Steering Trim is not adjusted correctly.
Front and Rear Wheel Nuts are too tight.
Throttle Trim is not adjusted correctly.
Batteries have run down.
Motor has lost power.
Front and Rear Wheel Nuts are too tight.
Dust or foreign objects are inside gears.
Can hear a gear noise from the chassis.
Can hear a clunking noise while running.
zum Herunterladen
und anderer Mini-Z Buggy Support Dokumente.
Page / Mini-Z Buggy Support
Mini-Z Buggy / Pågina apoyo Mini-Z Buggy /
/
Correction
Make adjustment
Manual
When tire rotation seems too tight, please
loosen slightly.
Make adjustment
Manual
Change batteries
Manual
Refer to "Replacing the Motor" on the Technical
Guide and install a replacement motor.
77
When tire rotation seems too tight, please
loosen slightly.
Turn the power switch OFF and clean out
Gears.
Due to high performance
vibration may occur. This is not a fault
This means the slipper clutch is working
If you can hear the noise continuously,
"Slipper Clutch Adjustment" on the Technical Guide.
der Technischen Information,
40
! ?
/
as per Instruction
P28.
as per Instruction
P24.
as per Instruction
P14
_ — o
digital servo some
Seite /
see