HT Instruments T2000 Bedienungsanleitung Seite 50

5.8. DISABLING AUTO POWER OFF FUNCTION
1. Press the ON/OFF key (>2s) to switch off the
2. Press both the ON/OFF key and the HOLD key at the same time
3. The "A.P.O no" message is shown on the display for a few seconds (see Fig. 36), the
instrument automatically switches on in measuring mode and the "P" symbol (see Fig. 2
– part 14) disappears from the display. The function is automatically restored when re-
booting the instrument.
5.9. DISABLING SOUND FUNCTION
1. Press the ON/OFF key (>2s) to switch off the
2. Press both the ON/OFF key and the AL key at the same time
3. The "bEEP no" message is shown on the display for a few seconds (see Fig. 37), the
instrument automatically switches on in measuring mode and the " " symbol (see Fig. 2
– part 1) disappears from the display. The function is automatically restored when re-
booting the instrument. When the sound function is off, all sounds of the meter are
deactivated, including key tones and alarm tones
Fig. 36: Disabling Auto Power OFF function
Fig. 37: Disabling sound function
EN – 21
instrument.
instrument.
T2000-T2100