HT Instruments T2000 Bedienungsanleitung Seite 44

5.2.4. HOLD
Shortly pressing the HOLD key activates the
"HOLD" function and freezes the result on the
display (see Fig. 14). To go back to the normal
measuring mode,
press the A (T2000) (RS232) (T2100) or
 key (to quit "HOLD" and enter resistance or
current measuring mode).
5.2.5. MEM
Shortly pressing the MEM key activates the
"MEM" function, and the result on the display is
saved in the internal memory (see §
5.2.6. Anomalous situations
While measuring, the indication "OL " means
that the resistance measured exceeds the
maximum value which can be measured by the
instrument (see Fig. 16).
The symbol "
turned on, and the symbol "
resistance alarm is turned on if the resistance
value is higher than the set resistance threshold,
the alarm sound and the symbol "
For managing the alarm
While measuring, the symbol "NOISE" means
that the instrument has detected a disturbance
current on the resistance measurement loop.
press the HOLD key again or
5.5.1).
" indicates sound function is
" indicates
thresholds, see §
" flashes..
5.6.
EN – 15
T2000-T2100
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18