Cosmo eXcess Pro Montage- Und Bedienungsanleitung Seite 68

68
3. OPERATION AND FUNCTION OF THE CONTROLLER
3.9 Optional functions
In this menu, optional functions can be selected and adjusted for the arrangement.
By selecting Add new function, different pre-programmed functions can be selected.
When a function is selected, a submenu will open in which all adjustments required can be
made.
When a function has been adjusted and saved, it will appear in the Opt. functions menu
above the menu item Add new function.
This allows an easy overview of functions already activated.
At the end of each optional function submenu, the menu items Funct. and Save function are
available.
In order to save a function, select Save function and confirm the security enquiry by selecting
Yes. In functions already saved, the menu item Delete function will appear instead.
In order to delete a function already saved, select Delete function and confirm the security
enquiry by selecting Yes.
If the menu item Delete function is confirmed by pressing the right button (✓), a security en-
quiry appears. The Lightwheel
selected and confirmed by pressing the right button (✓), the function is deleted and available
under Add new function again.
With the menu item Funct., an optional function already saved can be temporarily deactivated
or re-activated respectively. In this case, all adjustments remain stored, the allocated relays
remain occupied and cannot be allocated to another function.
can be used for changing between Yes and No. If Yes has been
®