ACD GRUPPE M2Smart HMI10 Wired Projektierungshandbuch Seite 47

The device may only be operated by trained specialized personnel.
The hazardous area must be visible from the operating position occupied by personnel.
According to EN ISO 13850 section 4.1, as well as EN 60204-1 section 10.7.1, it must be ensured that no
confusion can occur between an effective and an ineffective HMI handheld operating device.
®
If an M2Smart HMI10 Wired is not in use, store the operating device in a location that is protected from
access.
Excessive sound pressure from earphones, headphones or headsets can lead to hearing damage or
hearing loss.
If the rechargeable battery has reached the end of its service life or is damaged during installation, please
replace it immediately in accordance with the applicable regulations.
This is a Class A device (EN55032). This device can cause radio interference in residential areas.
In this case, the operating company may be asked to take appropriate actions.
The device has the following radio systems: WLAN, BT-compatible short-range radio, RFID
Frequency bands:

WLAN
2.412 GHz – 2.472 GHz
5.15 GHz – 5.35 GHz
5.47 GHz – 5.725 GHz

BT-compatible short-range radio
2.402 GHz – 2.480 GHz

RFID
13.56 MHz
Max. permissible transmission power in the frequency band:

WLAN 2.4 GHz band max. 100 mW

WLAN 5 GHz band max. 200 mW

BT-compatible short-range radio max. 100 mW

RFID max. 42 dBµA/m at 10 m distance (mag. field strength)
M2SmartSE HMI10 Wired_Bedienungs-Projektierungshandbuch_
Operating and Project Engineering Manual_V1.01_de_en 47 / 76