Fox FLOAT X LIVE VALVE NEO Bedienungsanleitung Seite 22

SERVICE
Properly cleaning your FOX product between rides, in addition to maintenance service scheduled at regular intervals, will help
to reduce repair costs and extend product life.
For further service procedures information, visit www.ridefox.com/OwnersManuals, or contact FOX for complete maintenance
service (1.800.369.7469 or mtbservice@ridefox.com).
Minimum Recommended Service Items
Inspect the entire exterior of your shock. The
shock should not be used if any of the exterior
parts appear to be damaged. Contact your
local dealer or FOX for repair.
Clean exterior with mild soap and water only,
then wipe dry with a soft towel. Do not use a
high-pressure washer or spray water directly at
the seal/shock body junction.
Check sag and damper settings. Inspect the
controls for visual damage and function.
Full service (full internal/external inspection,
damper rebuild, air seal replacement for air
shocks, air spring rebuild, bath oil and wiper
replacement).
*For those who ride lift-accessed DH, Park, or Extreme Freeride or in extremely wet/muddy or dry/dusty environmental
conditions where trail debris is sprayed onto the shock while on the trail, FOX encourages riders to perform maintenance earlier
than recommended above as needed. If you hear, see, or feel something unusual, stop riding immediately and contact a FOX
Authorized Service Center for proper servicing.
SEE ADDITIONAL INFORMATION AND VIDEOS: RIDEFOX.COM
Before After
every every Regularly
ride ride
X
X
22
Every 125 hours or
yearly, whichever
comes first*
X
X