Sony UPA-PC100 Benutzerhandbücher Seite 8

Printing Stored Image Data
Selecting the Output Service
Touch the appropriate button to select the output
service.
For example, touch [Prints (4 × 6)].
Setting the Media
1
Check the content of the message, and then touch
[OK].
A message prompts you to set the media.
8
2
Set the media that contains the image data, and
then touch the [OK] button in the lower right
corner of the screen. For details about how to set
each media, see the Operating Instructions.
After the media is set correctly, image data reading
begins.
Note
Here is a list of formats that are compatible with
this system:
• Exif (JPEG standard)
• BMP
• TIFF (uncompressed)
3
When the message prompts you to remove that
media after reading is completed, remove the
media, and then touch the [OK] button in the lower
right corner of the screen. A list of all the image
data read from the media is displayed.
Note
If you set a CD-ROM or CD-R at Step 2, the disc
is removed after the print job ends or if the
operation is cancelled.
(File extension: .JPG)
(File extension: .BMP)
(File extension: .TIF)