Sony UPA-PC100 Benutzerhandbücher Seite 40

Changing the Settings
- [Default] button
Touch this button to open the default entry screen,
then enter a number for the default number of prints
to output with [Other Size] (range: 0 to 10)
- [Max] button
Touch this button to open the maximum print entry
screen, then enter a number for the maximum
number of prints that can be output all at once with
[Other Size] (range: 1 to 255)
- [Max Pics] button
Touch this button to open the maximum image entry
screen, then enter a number for the maximum
number of images that can be selected for output
with [Other Size] (range: 1 to 255).
[Collage] button
Touch this button to open the [Setting - Menu -
Collage] screen to make the [Collage] output service
settings.
• [ON/OFF] button
With this settings set [ON], [Collage] is selected for
the output service in the output service selection
screen. Touch this button to toggle the setting [ON]
(selectable) or [OFF] (not selectable).
• [3.5 × 5], [4 × 6], [5 × 7], [8 × 10] buttons
[Collage] output settings can be made for each size.
Touch one of the buttons, [3.5 × 5], [4 × 6], [5 × 7],
or [8 × 10], to open the setting screen for the selected
size.
- [ON/OFF] button
When this setting is set [ON], the print size can be
selected from the screen displayed when [Collage] is
selected for the output service. Touch this button to
toggle the setting [ON] (print enabled) or [OFF]
(print disabled).
40
- [Quantity] button
Touch this button to open the screen where you can
select the number of output prints when [Collage] is
selected as the output service, then make the settings
below.
- [Default]
Touch this button to open the default value entry
screen and enter the number of prints output for
[Collage] (range: 0 to 10).
- [Max]
Touch this button to open the screen where you can
enter the upper limit for the number of prints to
output for [Collage] (range: 1 to 255).
[CD Creation] button
Touch this button to open [Setting - Menu - CD
Creation] screen and make [CD Creation] related
output service settings.
• [ON/OFF]
With this set [ON], [CD Creation] can be selected as
the output service on the output service selection
screen. Touch this button to toggle the setting [ON]
(selectable) or [OFF] (not selectable).
• [Limitation] button
Touch this button to open the screen where you can
set the upper limit for the number and size of the
images that can be written to a CD-R.
- [Max Pics] button
An upper limit can be set for the number of images
written to a CD-R. Touch this button to open the
screen where you can enter the upper limit for the
number of images (range: 1 to 255).